chipChipset
cpuSockets
speedFSB speed
8MHz
moboForm factor
OEM / Proprietary
dimDimensions
355mm x 305mm
chipCache
None/Integrated in the CPU
ramMax RAM size
1MB
ramRAM type
DIP-16 (1bit)
pwrPSU connector
connI/O ports
1x 
AT Keyboard
1x 
Floppy interface
1x 
Parallel
1x 
Serial
cardExpansion slots
4x 
16-bit ISA
1x 
8-bit ISA

Also known as:

Known issues:

  • Leaky Ni-Cd clock battery

The Ni-Cd battery may be leaking, risking damage to PCB layers & nearby components. Promptly remove the battery & clean corrosion/alkaline salts from the board. Use white vinegar to dissolve salts, but exercise caution as vinegar can corrode exposed metals. A thorough examination & repair may be needed. Replace battery with guide: https://github.com/wiretap-retro/Not-A-Varta

Notes:

This board looks AT but will not fit. The Keyboard port has the wrong offset.
The PSU pinout is non-standard. It does not require -5V, it is generated onboard. -mR_Slug
The slots are on a seperate riser board that is mounted horizontally.
The floppy connector is on the edge of the board is appears to be Tandon-specific as well.

Last updated 2024-05-16T10:58:35Z
Board info score is 6.7/10
0 files available
drv No drivers available

Disclaimer

The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.