DPT PM2011/95
Empty
-> Floppy ctrl.
-> Processor
-> Programmable Logic
-> SCSI ctrl.
| MTL | |
|---|---|
| Function | Location |
| HadProblem | |
| Cache module connector | CN4 |
| 34-pin Floppy connector | CN8 |
| Memory module connector | CN2 |
| 50-pin SCSI connector-external | CN11 |
| 50-pin SCSI connector-internal | CN10 |
| Disk mirroring module connector | CN7 |
| 4-pin connector-drive active LED | CN6 |
| Memory Expansion Board Cable Connector | CN4A |
| Microarchitecture | |
|---|---|
| CPUID | |
| Process node | 3500nm |
| Core | |
| Bus speed | 10MHz |
| Frequency | 10MHz |
| Multiplier | 1x |
| Power | |
|---|---|
| Voltage | |
- DPT PM2011/90 (no floppy)
1x
- 2x17 2.54mm pin header
1x
- 2x25 2.54mm pin header
1x
- 50-pin Centronics Connector
Empty
J8/CN8 is the floppy connector on the PM2011/95. It is not present on the PM2011/90.
Last updated 2024-10-29T17:11:49Z
Release date
File
Logs
Chip
Release date
File
Logs
Disclaimer
The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.