Packard Bell PB301 386SXIIE & 386SXIIES (REVISION C) AND PB301-V252
chipChipset
cpuSockets
PLCC68 PQFP100
speedFSB speeds
16MHz20MHz25MHz
moboForm factor
LPX (max 229 x 330 mm)
dimDimensions
220mm x 220mm
chipCache
None/Integrated in the CPU
ramMax RAM size
4MB
ramRAM type
30-pin SIMM
pwrPSU connector
AT (P8-P9)
connI/O ports
1x 
Floppy interface
1x 
Gameport
1x 
IDE interface
1x 
PS/2 keyboard
1x 
PS/2 mouse
1x 
Parallel
1x 
Serial
1x 
VGA
cardExpansion slots
1x 
16-bit ISA

Known issues:

  • DALLAS RTC coin cell empty

The motherboard's Real-Time Clock (RTC) chip contains a coin cell that may have drained, causing the loss of CMOS settings. This can result in an inability to save settings, causing system instability or failure to boot. To fix this, the RTC chip can be replaced with an equivalent or repaired by cutting into it and soldering on a new external coin cell holder. Replacement guides are available at https://github.com/necroware/nwX287 or https://github.com/necroware/nw12887, depending on the actual chip used.

Last updated 2024-01-01T15:30:16Z
Board info score is 7.3/10
chipChipset parts
ACC Micro 2036
chipVideo chips
Oak OTI-067
ramMax VRAM size
512KB
cpuCPU family support
0 files available

Vendor: Phoenix [1 entry]

POST string
Note
Core Ver.
BIOS Ver.
Logs
POST string
Note
Core version
BIOS version
1.10.2716
Logs
drv No drivers available
doc 2 board documents available
Release date
File
Logs
Release date
File
Logs
Release date
File
Logs
Chip
Release date
File
Logs
Chip
Release date
File
Logs

Disclaimer

The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.