Lanner Electronics AP-486LH
33MHz
Single Board Computer
185mm x 122mm
128KB256KB512KB
128MB
72-pin FPM72-pin EDO
1x
Disk-on-Chip Socket
1x
Floppy interface
1x
IDE interface
1x
PS/2 KB+MS Combo
1x
Parallel
1x
RJ-45 LAN
2x
Serial
1x
VGA
1x
16-bit ISA
1x
PC/104
Also known as:
- Lanner Electronics AP-486H (LAN only)
- Lanner Electronics AP-486LM
Known issues:
- DALLAS RTC coin cell empty
The motherboard's Real-Time Clock (RTC) chip contains a coin cell that may have drained, causing the loss of CMOS settings. This can result in an inability to save settings, causing system instability or failure to boot. To fix this, the RTC chip can be replaced with an equivalent or repaired by cutting into it and soldering on a new external coin cell holder. Replacement guides are available at https://github.com/necroware/nwX287 or https://github.com/necroware/nw12887, depending on the actual chip used.
Last updated 2024-03-20T22:23:02Z
Board info score is 9/10
2MB
Name
Version
OS support
Size
Filename
Name
Version
1.0
OS support
Size
645.1KB
Filename
Release date
File
Logs
Chip
Release date
File
Logs
Family
Release date
File
Logs
Disclaimer
The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.