Chipset
Socket 
FSB speed 
Form factor
Dimensions
Cache
Max RAM size
RAM type 
PSU connector
Also known as
- Biostar TP67B+ Ver. 6.3
I/O ports
Expansion slots
No board specific known issues
- Recalled Product (Certain revisions only)
One or more revisions of this hardware component were recalled from the market because of certain reasons like defects (including major breaking ones), overheating, fire, or safety hazards. Users of said hardware component should take precaution while using it or even avoid using it altogether.
Always look the hardware compoment's page for more info about it.
Notes
For the rev 6.3 board you need the Aptio4 AMI Firmware Update Utility (under docs/misc files) to update the BIOS.
1.) Put both the unpacked zip and the latest BST file on a USB flash drive
2.) In the BIOS you have to use the "Boot into UEFI shell" option
3.) Once in the shell change directory to thumb drive by typing: fs0:
3.5) To verify you're on the USB drive, typing this should show you the two files on the drive: ls
4.) Run command: AfuEfix64.efi P67CF706.BST /P /B /N /X
5.) Let it run, and when finished, exit uefi shell, type: exit
6.) Will throw you back in the original bios, select "Load Optimized Defaults" and then "Save Changes/exit" (F4)
7.) System will power cycle a few times on its own and then it's updated.
(F12 routine will not work and there's no DOS tool either)
Chips
2 BIOS files available
AMI - 2 entries
5 drivers available
Windows 2000
Windows 7
Windows Vista
Windows XP/2k3
Windows 2000
Windows XP/2k3
Windows 7
Windows 8.x
Windows Vista
3 board documents available
1 other file available
Image 1 of 3 (Motherboard Continuum)
Image 2 of 3 (Motherboard Continuum)
Image 3 of 3 (Motherboard Continuum)
Disclaimer
The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.