Logs
typeType
Data Acquisition (DAQ)
interfaceInterface
connectorSlot connector
8-bit ISA
signalSlot signals
8-bit ISA
dimSlot height
1
datePCI ID
Empty
fccFCC ID
Empty
dimDimensions
Empty
portintI/O ports
Empty
powerPower connectors
Empty
notes Notes

50pin multi I/O connector
34pin RTSI bus connector
The Lab-PC+ is a low-cost multifunction analog, digital, and timing I/O board for the PC. The Lab-PC+ contains a 12-bit successive-approximation ADC with eight analog inputs, which can be configured as eight single-ended or four differential channels. The Lab-PC+ also has two12-bit DACs with voltage outputs, 24 lines of TTL-compatible digital I/O, and six 16-bit counter/timer channels for timing I/O.

Last updated 2024-05-09T15:09:12Z
chip Chips
chip Specs

Additional specifications:

MTL
Card Type Analog to digital timing converter
I/O Options Analog input, digital input, digital output
Maximum DRAM N/A
Chipset Controller ACT A1010A
biosc No BIOS files available
drv No drivers available
doc 2 card documents available
Release date
File
Logs
Release date
1999
File
Logs
Release date
File
Logs

Disclaimer

The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.