KT Technology S/P Vers.01-J
Parallel controller
Serial controller
8-bit ISA
8-bit ISA
1
Empty
Empty
Empty
1x
- DB-25
1x
- DB-25
1x
- 2x5 2.54mm pin header
Empty
- Bad/shorted tantalum capacitors
Owners of this board have reported tantalum capacitor failures on this board. Make sure there's no short before turning on this board for the first time.
jumpers are with the jumpers from right to left 1 to 8;
These are proven :
1+2 (C1) ON : Serial port C1 enable
3+4 (C2) ON : Serial port C2 enable
5+6 (L1) ON : Parallel port enable (used as LPT1)
These are a good guess but not tested :
7+8 (L2) ON : Parallel port enable (used as LPT2)
So you probably can not use 5+6 and 7+8 at the same time
Last updated 2024-12-26T18:53:36Z
-
Signal transmitter/receiver
-
UART ctrl.
Additional specifications:
MTL | |
---|---|
Card Type | Multi I/O card |
I/O Options | Serial ports (2) |
Maximum DRAM | N/A |
Chipset/Controller | N/A |
Chip
Release date
File
Logs
Disclaimer
The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.